LED strip lights are one of the most flexible ways to light up your home. Color changing LED strip lights can be mounted on various surfaces, shortened or extended, or adapted into unusual shapes for bright lighting. Accent between rooms, stairs, and nooks to immerse yourself in a movie night or add color to your garden at night.
Before you start, gather the tools
- Using a tape measure and wire stripper
- Pair of scissors and screwdriver
Be sure to read these steps carefully before starting the installation. It contains many helpful tips and guidelines to help you ensure a perfect setup, save time and keep you safe.
It is important that this Lepro.com product (and any other electrical product) is installed in accordance with the National Electrical and all local building and electrical codes applicable to your area. Suppose you are unfamiliar with the NEC, local building/electrical work regulations, and the correct electrical equipment installation. An able and qualified electrician will need to be hired in that case.
Factors to consider
- An aspect LED constant voltage driver must be used with LED strip lights.
- Avoid connecting strip lights to reels while they are tightly coiled.
- Avoid installing strip lights in direct sunlight.
- When determining the correct wire gauge for your application, always consult a wire gauge chart. The gauge of wire depends on voltage drop, amperage rating, and environment. An incorrect wire selection could cause a fire.
- Waterproof strip lights are rated for outdoor use when exposed to moisture, rain, or humidity. Using water-resistant fixtures indoors is only for splashes that may occur, not submersion.
- Temperatures between -40°F and 122°F (-20°C and 50°C) are acceptable for use with this product. LED strip lights should not be installed outside of this range. When installing, make sure there is adequate airflow and a heatsink.
- LED strip lights CAN NOT be bent to a diameter smaller than your thumb.
- Do not fold LED strip lights.
- Don’t put pressure on the glass or acrylic panes of strip lights.
- If applicable, do not cover strip lights with anything other than mounting accessories.
Way to Connect Color Changing LED Strip Lights:
It is often the most reliable way to join two LED strips. But it is time-consuming, requires special equipment, and requires some skill.
Clips are faster and require no skill. So, if you have easy access to the strips, we recommend using clips (most installations).
However, the connections made with clips are not as permanent as solder. They are susceptible to corrosion and movement.
As a result, I recommend using solder if the strips may experience:
- Whether – any installation outdoors, or heating and cooling that could create condensation
- Motion – any flexible channel or location susceptible to vibrations
- Permanent – encapsulated in epoxy or another material
Installation of Color Changing LED strip lights:
The best way to install an LED strip is in an aluminum channel.
Channels are available with angled or straight, diffuser caps, or clear caps. Make sure the channels fit the strip as they come in different widths.
Using a hacksaw or electric miter saw, you can cut soft aluminum channels. A multi-tooth carbide blade is required when using a miter saw.
Once cut to size, you can use the screws to attach the duct securely.
Installing (https://www.lepro.com) LED strips lights inside a channel has the following benefits:
- Allows the strip’s adhesive to form a secure, long-lasting bond due to its uniform surface.
- Aluminum serves as a heatsink and helps dissipate heat for longer LED life.
- Plastic covers diffuse light. As a result, uniform illumination is achieved.
- The covers will also keep the strip from getting damaged by dust.
- The channels’ clean lines help give the installation a more polished appearance when the LED strips are visible.
Home Color Changing LED Strip Lights Benefits
Do not limit yourself to CFL or LED bulbs when switching from traditional to eco-friendly alternative lighting. Consider using LED strip lights instead. They are ideal not only for functionality but also for a variety of decorative applications.
You should consider them for the following reasons:
Adaptability
The primary function of LED strip lights is their flexibility. It can be mounted on curved surfaces, corners or molded into just about any shape, unlike light bulbs.
Optimizing energy efficiency
LED lights use up to 75% less energy than incandescent lamps and up to 50% less than CFLs, making them energy-efficient light sources.
Easy to install
You can usually stick LED light strips (Lepro.com) wherever you like by peeling and sticking the adhesive on the back of the strips.
Toxic-free
color changing led strip lights do not contain mercury or harsh chemicals, unlike fluorescent lights. This means that they don’t require particular disposal or pose a health risk if dropped.
Eco-friendly
LED lights do not contain harsh chemicals and are recyclable. In addition, its long life and low energy use make it an ideal solution for environmentally friendly lighting.
Temperatures are low
Conventional light bulbs use 90% of their energy as heat, and CFLs use 80%, but LEDs remain thoroughly cooled. This makes the LED ideal for use with children, pets, and heat-sensitive areas.
Quality of light
Manufacturers are working to make the light quality of LED lighting more attractive by producing cool and bright lighting tones.
Long life
The average life of LED lights is up to 50,000 hours. Unlike standard lighting, the output level is lower, and the brightness is lower instead of burning.
Customizable
The LED light strip can be customized to fit any space by cutting it to the desired length.
Low UV radiation
There is very little infrared and ultraviolet light emitted by LED strip lights. This is ideal for use around light-sensitive materials such as artwork.
Lighting Instantly
Unlike conventional lights, (lepro.com) LED lights do not need to be heated to illuminate. Unlike CFLs, the lights come on instantly when you flip the switch, unlike flickering from CFLs.
