Installing Sod

Before you install turf, there are a few things that you should know. You just can’t put the turf out and expect it to grow. There are a few things that you should do to prepare your yard for the grass.

If you want to install grass, but choose not to do it yourself, there are people that you can call. You could call Mr Lawn grass installation Vancouver to see what they have to offer. They can tell you all about installing grass.

This article will help you to learn all that you need to do to install turf the right way. You can also have a professional install it for you and do research to find more information.

Sod Installation in Vancouver

Ways to Prepare Your Yard for Sod Installation in Vancouver

  1. Have Your Soil Tested – You need to have a sample of your dirt tested. This way you can tell if there are essential nutrients that are missing. If there are missing nutrients, you can find what they are and add them to the area.
  1. Clear Away All the Debris – You don’t want to have any debris in the area where you are placing your sod. Any debris that is in the area can harm the turf and then it won’t grow evenly. It can interfere with the proper growth of the grass, so clean the area carefully.
  1. Rid the Area of Unwanted Grass and Weeds – Just like debris, you want to remove all weeds and unwanted grass from the area. If you don’t do this, they will grow through turf that you place down. Be careful to use an herbicide that will kill only the turf and weeds that you want gone: https://www.finehomebuilding.com/forum/preparing-ground-for-sod. Wait the recommended amount of time before you install the turf.
  2. Grade the Soil – Use a rake or a shovel, or both, to break any peaks that might be in the yard. Even things out so that you have a nice, level lawn when the turf is installed. Make sure that you slope the dirt away from any buildings so that you don’t have water that builds up near them.
  1. Add Some Topsoil – Adding topsoil will make your dirt healthier which will help to establish the turf. You should add about six inches of topsoil to the area. You could also add manure or compost to help it to get started.
  1. Add Amendments – There are amendments such as lime, sulfur, and gypsum that you can add to the soil. You will know which ones that you should use after you get the results from your soil test. The lime will increase the pH in your soil, the sulfur will lower that. Gypsum will flush out any extra salt that you might have in your soil.
  2. Till the Soil – You will want to till the top four inches of your soil – don’t go any deeper because you can damage the structure of the soil. Tilling the soil will help mix the topsoil and the amendments. It will also make it easier for the roots of the turf to establish themselves.
  1. Fine Grade the Soil with a Heavy Mat – If you do fine grading, you will be able to smooth the dirt. You don’t want to overdo it; it can make the ground too hard for the sod to take root. You just want to go over the dirt lightly to fine grade it.
  1. Water the Soil – You will want to water the dirt before you even add the sod. You don’t want it to be soaked, just damp. If you add too much water and it becomes muddy, you will need to wait until it dries a little before you add the sod.

Grass Installation Company

Conclusion

There are many things that you need to do before you install grass in your yard. You need to prepare the area by grading it and adding amendments to the dirt. You should also make sure that you have removed all the unwanted grass and weeds. You don’t want them to grow through the sod.

You can install the grass yourself, or you can call a professional and they can install it for you. Either way, you can prepare your ground for the sod. This will help your turf to grow even better.

Leave a Reply

Your email address will not be published. Required fields are marked *