Efficient Mold Removal at Home Tips and Guidelines

Mildew and mold can often be found in hot and humid environments that help them grow. These happen to be a real problem during the summer and in kitchens and bathrooms, regardless of cleaning if they are not treated right. Dehumidifiers can be a good way to control your humidity level, but in the end sometimes you need to do quite a bit more to make things work. There are many ways you can clean mold, but we will cover some of the ones you can deal with using commercial and homemade products to make it happen:

Cleaning with bleach

This is a relatively common solution for mold treatment, since it happens to be a pretty powerful chemical capable of destroying almost all types of mold it is used on directly, making it a prime choice for dealing with this in the long run. It possesses toxic fumes and needs to have good ventilation while you work, but you can do a lot of good if you dilute it well, since it will be really good as a fungicide and for disinfection of surfaces all around problem areas.

Making use of borax

Borax is a great product able to clean mold and possessing really low toxicity compared to bleach. It lacks the harsh chemical smell and vapors of other cleaners; with a high pH level this makes it a wonderful solution for most cleaning that may even involve sensitive areas such as countertops. If you mix this in with water in about a 1/16 proportion, you will have an excellent solution for mold cleaning you can use anywhere around your home. You should always remember to vacuum the area where the mold is before you do the actual cleaning, using a HEPA vacuum cleaner, as this will prevent the mold spores from flying around the room when you scrub. A scrubbing brush will also allow you to remove the mold from tougher surfaces, so make use of it whenever you can.

Making use of vinegar

There are ways you can use vinegar to do more than simply remove mold, as it can work for cleaning metal, unclogging drains, eliminating odors and more. The small of vinegar can quickly disappear when an hour or so passes, so you won’t have to worry about it lingering for too long. You can use a spray bottle to directly apply it onto moldy areas, but you would do well to use a brush to make sure it gets the job done efficiently.

Making use of ammonia

This is another chemical that works really well for cleaning mold but it happens to be pretty dangerous when combined with bleach. Never mix the two together if you value your health. If you do need to use it, use a 1:1 mixture of it and water. This should get the job done really well, but don’t forget it still happens to be quite toxic and you should always wear protection when you’re cleaning with it. It works well for kitchen cleaning and bathroom cleaning, but you should still have good ventilation if you want to make things work out well.

Using tea tree oil and grapefruit seed extract

A relatively expensive, but really useful and efficient solution you can deal with, tea tree oil is an excellent fungicide that happens to be nontoxic and all natural. It will get the job done with only a few drops in a gallon of water due to its strength, but in the end you will still need to do a good bit of scrubbing. Grapefruit seed extract works in pretty much the same way if you use it, so you should only need to use a few drops in most cases.

Using laundry detergent

Although this should not be your first solution, you would do well to consider using it as well. Laundry detergent is easily found and it happens to be the cheapest solution, plus you can use it to clean a lot of surfaces without worrying about hazardous chemicals. It will get the job done, even if it is not quite as effective as other examples on this list of cleaners.

Visit this cleaning site to obtain more helpful information

Related posts