7 Fantastic Ways to Install Outdoor Antennas

Television is a form of entertainment that most people indulge in on a regular basis. Whether one just came home from work or one is about to leave, television often finds ways to creep into our lives. Reception is crucial in determining the extent of one’s e

Indoor versus Outdoor Antennas

Indoor antennas are really common these days because they work out of the box. As there is lesser hassle and costs involved in installing these, consumers often prefer them. The only downside to this is that cheaper models don’t often offer adequate reception

Outdoor antennas, on the other hand, are the complete opposite of indoor ones. They have tremendous reception but are difficult to install. They are usually located in key locations of the home and usually require professional assistance to install. Find out the different ways outdoor antennas can be installed below.

Gable Install

Homes with pitched roofs usually have gable walls. This refers to that triangular portion of the wall that encloses the roof ends. As it is a flat unused outdoor surface, it’s the perfect place for an antenna. All one needs to do is purchase gable end mounts and a mast pipe for the antenna. The gable end mounts usually have instructions with them on how to set this up. If not, consider hiring a professional to do it as it requires going up and down the roof several times.

Roof Mounting – Base

While the gable is pretty exposed, it’s still not the peak of the home. For best results, roof mounting is advised. There are 2 ways of mounting antennas to the roof. The first is base mounting. This is accomplished by holding the mast at the base and usually requires guy wires for support.

Roof Mounting – Tripod

Tripod roof mounting is pretty much the same except that it is stronger and much more rigid. If a lengthy mast is used, the tripod should be guyed as well.

Attic Install

Compared to roof mounting, attic installation also has its own appeal. One can place it anywhere in the attic but it is highly advised to place it protruding the attic window so it can get maximum reception. Attic installation is preferred by some because the house still looks neat even after installation. If you have a metal roof, it is all the more important to have even just a bit of the antenna protruded outside.

Wall Install

Installing on walls is as easy as purchasing wall mounted brackets. They should be placed far from one another, but within practical bounds, to promote rigidity. Like tripod roof mounts, masts that are lengthy need to be properly guyed.

Chimney Install

Chimney mounts are relatively easy to install. This method of installation is most apt for vertical chimneys that are sturdy. It is highly advised to have a mast length high enough for the antenna to avoid gas and smoke emissions from the chimney. If the mast becomes exceedingly high, it should be guyed so as to lessen the stress on the chimney.

Ground Mounting

Ground mounts are probably the most secure of all. They are extremely sturdy and will last a long time. In order to get a good height, several masts can be piled on top of each other. As the base support is already decent, one only needs to concern himself with the wall mounts supporting the mast. If stacking several masts makes you uneasy, a telescoping mast can be used.

For installations in Melbourne, Australian Antennas is the best option. With over 29 years of experience, their track record and 10-year guarantee is sure to give you the best bang for your buck. The improved reception is sure to make home owners appreciate their home theatres even more.